Kyocera KM-2030 2030 Instruction Handbook Rev 2C - Page 18

Replacing the toner cartridge and waste toner tank, WARNING, CAUTION

Page 18 highlights

CHAPTER 3 HOW TO LOAD PAPER 2. Replacing the toner cartridge and waste toner tank If "Add toner to resume copying." appears on the message display, replenish the toner. Although several copies can be made after the message appears, it is recommended to replace the toner cartridge immediately. After replacing the toner cartridge, be sure to also replace the waste toner tank. * Replenish toner only when the message is displayed. 3 Pull the old toner cartridge out toward you. CAUTION Do not incinerate toner and toner containers. Dangerous sparks may cause burns. WARNING High voltage is present in the charger section. Take sufficient care when working in this area, as there is a danger of electrical shock. 1 Open the front cover. 4 Tap the new toner cartridge on the top 5 or 6 times and shake it from side to side 8 to 10 times. 2 Turn the toner cartridge release lever to the right as far as it will go. The old cartridge will be unlocked. 5 Fit the new toner cartridge into the copier. * Align the arrow on the top of the toner cartridge with the cutout in the copier and then insert the cartridge into the copier. 3-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75

CHAPTER 3
HOW TO LOAD PAPER
3
4
5
2
3-5
1
2. Replacing the toner cartridge and waste toner tank
If "Add toner to resume copying." appears on the message display,
replenish the toner. Although several copies can be made after the
message appears, it is recommended to replace the toner cartridge
immediately. After replacing the toner cartridge, be sure to also
replace the waste toner tank.
* Replenish toner only when the message is displayed.
Open the front cover.
Turn the toner cartridge release lever to the right as far as it
will go. The old cartridge will be unlocked.
Pull the old toner cartridge out toward you.
Tap the new toner cartridge on the top 5 or 6 times and
shake it from side to side 8 to 10 times.
Fit the new toner cartridge into the copier.
* Align the arrow on the top of the toner cartridge with the
cutout in the copier and then insert the cartridge into the
copier.
WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is a
danger of electrical shock.
CAUTION
Do not incinerate toner and toner containers. Dangerous
sparks may cause burns.