Kyocera KM-2030 2030 Instruction Handbook Rev 2C - Page 23
Enlargement/reduction, Zoom copy mode, Auto magnification selection mode
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2. Enlargement/reduction (1) Auto magnification selection mode The original image is enlarged/reduced automatically according to the selected paper size. CHAPTER 4 BASIC OPERATION 2 Press the Paper Select key to specify the paper size. The magnification ratio will be displayed. IMPORTANT • When using this mode regularly, make sure that "AMS" has been selected in "8 AMS mode" on page 6-12. 3 Copying will start when the Start key is pressed. (2) Zoom copy mode The zoom ratio can be set to any value from 50 to 200% in 1% increments. 1 Set the original(s). The size of the original will be automatically detected and the same size paper as the original will be selected. NOTE • If "100%" has been selected in "8 AMS mode" on page 6-12, press the Manual key to display "AMS". 1 Set the original(s). 2 Press the Zoom (+) or Zoom (-) key to change the displayed zoom ratio. Press the Paper Select key to change the paper size. 3 Copying will start when the Start key is pressed. 4-4