Kyocera KM-2030 2030 Instruction Handbook Rev 2C - Page 50
Machine default settings - fax board
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
CHAPTER 6 COPIER MANAGEMENT (3) Machine default settings The following 15 types of settings can be changed in the machine default setting mode. Set them as desired, in order to gain full use of your copier. Machine default setting Content of machine default setting 1 Status report Prints contents of machine default settings as a status report. Setting range Default setting Page ------- ----- 6-16 2 Auto shut-off Turns the auto shut-off function (page 4-7) On or Off. The auto shut-off function automatically turns off the main switch if copying is not performed for a certain period of time. • If auto shut-off interferes with your copying operations, turn this function off. It is recommended to prolong the time interval that triggers auto shut-off before actually turning it off. • If the optional fax board or printer board is installed, the copier enters the energy saver mode when the auto shut-off function is triggered. For details, see the instruction handbook for the fax board or printer board. On/Off On 6-16 3 Special paper In case of selecting the paper size on the message display, displays (*) next to the paper size of the drawer if it contains special paper such as colored paper or recycled paper. Drawer 3 or 4 can be selected only when the optional drawer has been installed. • If special paper is loaded in the drawer, select the paper type in "5 Paper type (1st to 4th)". * (Set)/- (Not set) - (Not set) 6-17 4 APS Selects whether paper in the drawer set in "3 Special paper" is used or not in the auto paper selection mode or automatic drawer switching (page 2-4). On/Off Off 6-17 5 Paper type (1st to 4th) Selects the type (standard or special) of paper to be loaded in the drawer. • The settings for Drawers 3 and 4 are not displayed when the copier is not equipped with the optional drawers for Drawers 3 and 4. Plain, Recycled, Letterhead, Color Plain 6-17 6 Paper type (bypass) Selects the type (standard or special) of paper to be loaded in the multi-bypass. Plain, Transparency, Labels, Recycled, Rough, Letterhead, Color, Envelope, Cardstock Plain 6-17 7 Select ejector of Selects whether to eject fax outputs to the copier or either the finisher Inner output, Finisher FAX or job separator. Finisher (Job • This setting is not displayed when the copier is not equipped with the (Job separator) separator) - optional fax board and finisher or job separator. 8 Select ejector of copy Selects whether to eject copied paper to the copier or either the finisher or the job separator (or the duplex unit). • This setting is not displayed when the copier is not equipped with the optional finisher or the optional job separator (or the duplex unit). Inner output, Finisher (Job separator) Inner output 6-18 9 Preheat time Selects a certain length of time from when copying ends to when the energy saver function (page 4-7) is actuated. 5 to 45 min. (5-minute increments) 15 min. 6-18 6-14