Kyocera KM-2030 2030 Instruction Handbook Rev 2C - Page 44
Making copies when the copier is in the copy, management mode, Turning copy management ON/OFF
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
q Turning copy management ON/OFF 1 Display the copy management selection screen. (See page 6-3.) CHAPTER 6 COPIER MANAGEMENT (4) Making copies when the copier is in the copy management mode When the copier is in the copy management mode, "Enter 7-digit code with # keys." will appear on the message display. NOTE • Copy management ON or OFF appears in the upper right-hand of the screen. See the following procedures to turn copy management ON/OFF. 2 Press the cursor down key to select "Management on/off". 1 Enter the ID-code for your department with the numeric keys. 3 Press the enter key. 4 Press the cursor down or up key to select "On" or "Off". 2 If "Ready to copy." appears, carry out copying in the usual manner. 5 Press the enter key. The display will return to the screen in step 2. 6 Make sure that "End" has been selected and press the enter key. When "Off" is selected, the message display will return to the "Ready to copy." screen. NOTE • When copying is finished, press the Energy Saver (preheat) key. If the auto clear function works, the copier will return to the previous state. 6-8