Kyocera KM-2030 2030 Instruction Handbook Rev 2C - Page 51
Auto drawer, Counter report
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
CHAPTER 6 COPIER MANAGEMENT Machine default setting Content of machine default setting Setting range Default setting Page 0 Shut-off time Selects a certain length of time from when the copier is not used to when the auto shut-off function (page 4-7) switches off the power automatically. The auto shut off function can be turned off as well. This setting cannot be used in that case ("2 Auto shut-off"). The initial setting is 30 minutes. • It is recommended to prolong time interval that triggers the auto shut- off if the copier is used frequently, whereas shorten it if it is not used frequently. • See "2 Auto shut-off" to release the auto shut-off function. • If the optional fax board or printer board is installed, the copier enters the energy saver mode when the auto shut-off function is triggered. For details, see the instruction handbook for the fax board or printer board. 15 to 240 min. (5-minute increments) 30 min. 6-18 ! Display contrast adjust. Changes the display contrast when the message display is not seen clearly. 1 to 7 4 (center) 6-18 @ Management code change Changes the management code that accesses the management mode (page 6-1) and management mode in this default setting (page 6-9). • If management code is changed, keep a note of the new one. ---- 2000 6-18 # Silent mode The copier can be switched to the silent mode, which stops the motor inside the copy machine immediately after copying has been finished. When "ON" is selected, the motor stops immediately after copying has been finished. On/Off Off 6-18 $ Auto drawer switch Selects whether the automatic drawer switching function (page 2-4) is used or not. On/Off On 6-19 % Counter report Prints the toner counter report. ------- 6-19 ----- 6-15