Kyocera KM-2030 2030 Instruction Handbook Rev 2C - Page 14
How to Load Paper, How to load paper
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CHAPTER 3 HOW TO LOAD PAPER 1. How to load paper This copier comes standard with two drawers and a multi-bypass. (1) Precautions for loading paper After unpacking the paper, fan it several times and then load into the tray. 2 Press the drawer bottom plate down and fix it there. IMPORTANT • Loading paper into the standard drawer, optional drawer or multi- bypass when some paper is still remaining in each of them may cause paper misfeeds. (2) Loading paper into the drawer Up to 250 sheets of standard paper (75 or 80 g/m2/standard paper as specified by our company) or colored paper can be loaded into the each drawer. (Inch specifications) * The each drawer can be set to hold paper of any desired size from 11" x 17" to 5 1/2" x 8 1/2". (Metric specifications) * The each drawer can be set to hold paper of any desired size from A3 to A5R. IMPORTANT • Set the type of paper (standard paper, recycled paper, letterheads or colored paper) to be loaded in the drawer in "5 Paper type (1st to 4th)" on page 6-14. 1 Pull the drawer out toward you as far as it will go. * Do not pull more than one drawer out at a time. 3 Hold the width adjustment lever and move it to align the width guide with the required paper width. Paper sizes are marked inside the drawer. 4 Hold both sides of the length adjustment plate and move it to align with the required paper length. 3-1