Lexmark X5070 User's Guide (Mac) - Page 26
Setting the distinctive ring using the control panel
View all Lexmark X5070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Setting the distinctive ring using the control panel Distinctive ring is a service provided by some telephone companies that assigns multiple phone numbers to a single telephone line. If you subscribe to this service, you can program your printer to have a distinctive ring pattern and phone number for incoming faxes. 1 From the control panel, press Fax Mode. 2 Press . 3 Press or repeatedly until Fax Setup appears. 4 Press . 5 Press or repeatedly until Ringing and Answering appears. 6 Press . 7 Press or repeatedly until Ring Pattern appears. 8 Press . 9 Press or repeatedly until the ring pattern you want appears. 10 Press to save the setting. Related topics: • "Using the control panel" on page 95 Setting up Quick Dial buttons using the control panel 1 From the control panel, press Fax Mode. 2 Enter a fax number. Notes: • You can include a calling card number as part of the fax number. • A fax number can include up to 64 characters. Characters can include numbers, the symbols * and #, or a three-second pause created by pressing Redial / Pause. The pause appears as a comma on the display. 3 Hold down an empty Quick Dial button for two seconds. 4 To program additional Quick Dial buttons, repeat step 2 through step 3. Note: You can also program any empty Quick Dial button whenever you are prompted to enter a fax number. Setting the number of rings before receiving a fax automatically using the control panel 1 From the control panel, press Fax Mode. 2 Press . 3 Press or repeatedly until Fax Setup appears. 4 Press . 5 Press or repeatedly until Ringing and Answering appears. 6 Press . Faxing using the control panel 26