Netgear D7000 User Manual - Page 230
Change a Static Route
View all Netgear D7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 Field Description Gateway IP Address Enter the IP address of the gateway. The IP address of the gateway must be on the same LAN segment as the modem router. Metric Enter a number from 1 through 15. This value represents the number of routers between your network and the destination. Usually, a setting of 2 or 3 works, but if this is a direct connection, set it to 1. 10. Click the Apply button. Your settings are saved. The static route is added to the table on the Static Routes page. Change a Static Route You can change an existing static route. To change a static route: 1. Launch an Internet browser from a computer or WiFi device that is connected to the network. 2. Type http://www.routerlogin.net. A login window opens. 3. Enter the user name and password for the modem router. The user name is admin. The default password is password. The user name and password are case-sensitive. 4. Click the OK button. The BASIC Home page displays. 5. Select ADVANCED > Advanced Setup > Static Routes. The Static Routes page displays. 6. In the Static Routes table, select the radio button to the left of the route. 7. Click the Edit button. The page adjusts. 8. Change the settings for the route. Manage the WAN and LAN Network Settings 230