Netgear D7000 User Manual - Page 71
Description, Field, Use VLANID, PPPoE PPP, over Ethernet, Manage the Internet Settings Manually
View all Netgear D7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 Field Priority (0 ~ 7) Bridge Mode Encapsulation Login Password Service Name Connection Mode Description A VLAN ID might be required if you subscribe to both Internet service and IPTV service. In some unusual situations, a VLAN ID is required for VDSL Internet service. If your ISP did not provide you with a VLAN ID, leave the Use VLANID check box cleared, which is the default setting. If your ISP provided you with a VLAN ID and a priority value, enter the priority value, which is a number from 0 to 7. You can enter a priority value only in combination with a VLAN ID. If your ISP did not provide you with a priority value, leave the default setting (0). This setting is an option that applies to the IPTV interface only. For information about configuring bridge mode, see Enable Bridge Mode for IPTV Devices on page 215. For a PPP over Ethernet (PPPoE) connection, select PPPoE (PPP over Ethernet) from the menu. Note PPP over ATM (PPPoA) is not supported for a VDSL connection. Enter the login name that you use to log in to your Internet service, as indicated by your ISP. This login name is often an email address. Enter the password that you use to log in to your Internet service, as indicated by your ISP. Enter the service name that you use to log in to your Internet service, as indicated by your ISP. Often, a service name is not required. Select how the Internet connection functions: Manage the Internet Settings Manually 71