Netgear D7000 User Manual - Page 286
Change a Port Triggering Rule, Required Inbound Connection
View all Netgear D7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 Field Description • Any. This is the default setting and allows any computer on the Internet to use this service. • Single address. Restricts the service to a particular computer. Service Type Select the protocol (TCP or UDP) that is associated with the service or application. Triggering Port Enter the number of the outbound traffic port that must open the inbound ports. Required Inbound Connection Service Type Select the protocol (TCP or UDP) that is associated with the inbound connection. If you are unsure, select TCP/UDP. Starting Port Enter the start port number for the inbound connection. Ending Port Enter the end port number for the inbound connection. 9. Click the Apply button. Your settings are saved and the rule is added to the Port Triggering Portmap Table on the Port Forwarding / Port Triggering page. Change a Port Triggering Rule You can change an existing port triggering rule. To change a port triggering rule: 1. Launch an Internet browser from a computer or WiFi device that is connected to the network. 2. Type http://www.routerlogin.net. A login window opens. 3. Enter the user name and password for the modem router. The user name is admin. The default password is password. The user name and password are case-sensitive. 4. Click the OK button. Manage Port Forwarding and Port Triggering 286