Netgear DG834G DG834Gv5 Reference Manual - Page 135
VPN Status, Connect, General, Remote Address Data for example - review
UPC - 606449029918
View all Netgear DG834G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Wireless ADSL2+ Modem Router DG834G User Manual 6. Repeat these steps for the DG834Gv5 on LAN B. Pay special attention to the following network settings: • General, Remote Address Data (for example, 14.15.16.17) • Remote LAN, Start IP Address - IP Address (for example, 192.168.0.1) - Subnet Mask (for example, 255.255.255.0) - Pre-shared Key (for example, 12345678) 7. Use the VPN Status screen to activate the VPN tunnel: Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See "Activating a VPN Tunnel" on page 6-25 for information about the other ways. a. From the main menu, select VPN Status to display the VPN Status/Log screen. Then click VPN Status to display the Current VPN Tunnels (SAs) screen: Figure 6-45 b. Click Connect for the VPN tunnel that you want to activate. Review the VPN Status/Log screen (Figure 6-45) to verify that the tunnel is connected. Virtual Private Networking v1.0, May 2008 6-41