Netgear DG834G DG834Gv5 Reference Manual - Page 36
Configuring WEP, WEP Wired Equivalent Privacy 128-bit encryption
UPC - 606449029918
View all Netgear DG834G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Wireless ADSL2+ Modem Router DG834G User Manual Configuring WEP To configure WEP data encryption: 1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default user name of admin, and default password of password, or using whatever user name, password, and LAN address you have chosen for the modem router. 2. From the main menu, select Wireless Settings to display the Wireless Settings screen. 3. In the Security Options section, select the WEP (Wired Equivalent Privacy) radio button: Figure 2-3 4. Select the Authentication Type: Automatic, Open System, or Shared Key. The default is Open System. Note: The authentication scheme is separate from the data encryption. You can select an authentication scheme that requires a shared key but still leaves the data transmissions unencrypted. If you require strong security, use both the Shared Key and WEP encryption settings. 5. Select the Encryption Strength setting: • WEP (Wired Equivalent Privacy) 64-bit encryption. Enter 10 hexadecimal digits (any combination of 0-9, a-f, or A-F). • WEP (Wired Equivalent Privacy) 128-bit encryption. Enter 26 hexadecimal digits (any combination of 0-9, a-f, or A-F). 6. Enter the encryption keys. You can manually or automatically program the four data encryption keys. These values must be identical on all computers and Access Points in your network: 2-8 Configuring Your Wireless Network and Security Settings v1.0, May 2008