Netgear WNHDE111 WNHDE111 User Manual - Page 20

Positioning Your Unit, concrete can also affect your wireless signal. - range

Page 20 highlights

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual Table 1-2. Product label information Item Serial Number which is also default WPA/WPA2 security key. MAC Address. Description The serial number is also the factory default WPA/WPA2 security key. This enables easy automated WPS Push 'N' Connect setup. The Media Access Control (MAC) address of this unit, which will be visible in status monitoring screens on the unit or on a router. Positioning Your Unit The operating distance or range of your wireless connection can vary significantly depending on the physical placement of your unit. For example, the thickness and number of walls the wireless signal must pass through might limit the range. Note: Failure to follow these guidelines can result in significant performance degradation or an inability to wirelessly connect to the bridge. For best results, place your bridge: • Near the center of the area where your computers and other devices will operate, preferably within line of sight to your wireless devices. • Accessible to an AC power outlet and near Ethernet cables for wired computers. • In an elevated location such as a high shelf, keeping the number of walls and ceilings between the wireless range extender and your other devices to a minimum. • Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and concrete can also affect your wireless signal. • If placing 2 Wireless-N AccessPoint/Bridges with a direct line of sight between them, do not place them closer than 15 feet, as the antennas are tuned for this optimum distance. Orient the 2 units with the front panels (the side with the Power light) facing each other. 1-6 Getting Acquainted v1.1, May 2008

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
1-6
Getting Acquainted
v1.1, May 2008
Positioning Your Unit
The operating distance or range of your wireless connection can vary significantly depending on
the physical placement of your unit. For example, the thickness and number of walls the wireless
signal must pass through might limit the range.
For best results, place your bridge:
Near the center of the area where your computers and other devices will operate, preferably
within line of sight to your wireless devices.
Accessible to an AC power outlet and near Ethernet cables for wired computers.
In an elevated location such as a high shelf, keeping the number of walls and ceilings between
the wireless range extender and your other devices to a minimum.
Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large
expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and
concrete can also affect your wireless signal.
If placing 2 Wireless-N AccessPoint/Bridges with a direct line of sight between them, do not
place them closer than 15 feet, as the antennas are tuned for this optimum distance. Orient the
2 units with the front panels (the side with the Power light) facing each other.
Serial Number which is also
default WPA/WPA2 security
key
.
The serial number is also the factory default WPA/WPA2 security key.
This enables easy automated WPS Push 'N' Connect setup.
MAC Address.
The Media Access Control (MAC) address of this unit, which will be
visible in status monitoring screens on the unit or on a router.
Note:
Failure to follow these guidelines can result in significant performance degradation
or an inability to wirelessly connect to the bridge.
Table 1-2.
Product label information
Item
Description