Netgear WNHDE111 WNHDE111 User Manual - Page 44
Push Button Configuration, Using the Physical Push Button - specifications
UPC - 606449054279
View all Netgear WNHDE111 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual • "Push Button Configuration" • "Security PIN Entry" on page 4-9 Push Button Configuration There are two methods to enable a wireless client to join a network using a push button on the router: using the physical push button or using the software button in the Add WPS Client screen. Using the Physical Push Button 1. Press the button on the Wireless-N AccessPoint/Bridge for over 5 seconds. For information about the WPS button light, see the . The green button light begins to blink in a regular pattern. While the light is blinking, you have 2 minutes to enable WPS on the client that you are trying to connect to the router. 2. On the wireless client, follow its specific networking instructions to enable WPS, to allow it to connect to the router. The Wireless-N AccessPoint/Bridge's green when one of these conditions occurs: button light ceases blinking and remains on • The router and the client establish a wireless connection. • The 2-minute window period expires for establishing a WPS connection. If the connection is not established, no WPS security settings will be specified in the Wireless-N AccessPoint/Bridge. Using the Software Button in the Add WPS Client Screen 1. Log in to the router as described in "Viewing or Changing Settings" on page 3-1. 2. Select Add WPS Client in the main menu, and click Next. 3. Select the Push Button setup method. Figure 4-3 4-8 v1.1, May 2008 Securing My Wireless