Netgear WNHDE111 WNHDE111 User Manual - Page 27
Connecting Other Devices to a WNHDE111 - repeater
UPC - 606449054279
View all Netgear WNHDE111 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual Connecting Other Devices to a WNHDE111 There are three ways you can connect other devices to the access point: • For wireless devices that support the WPS automated method, repeat the steps above for the WPS setup method. WPS will automatically transfer the security settings from the Wireless-N Access Point to the device you are adding. • For wireless devices that do not support WPS, manually configure them. Refer to the instructions in the product documentation of the wireless device you will add. The WNHDE111 default WPA/WPA2 security key is the serial number printed on the back of the unit. The default wireless network name (SSID) is NETGEAR-HD. 1TX18149020CB Default WPA/WPA2 security key Figure 2-7 • For wired devices, use an Ethernet cable to connect to a free Ethernet port on the WNHDE111. Easy Secure Wireless Setup 2-7 v1.1, May 2008