Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 100
ESC * r V m n NUL, Buzzer Drive Terminal 1
View all Oki OKIPOS408II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
ESC * r V m n NUL [Name] Execute external buzzer drive [Code] ASCII ESC * rV m Hex. 1B 2A 72 56 m Decimal 27 42 114 86 4m n NUL n0 n0 [Defined Area] [Initial Value] [Function] m=49,50 1≤n≤20 - - Repeatedly drives the buzzer according to the ON/OFF conditions set by the external buzzer drive pulse conditions command m n1 n2. m specifies the buzzer drive terminal to drive. m Buzzer Drive Terminal 49 Buzzer Drive Terminal 1 50 Buzzer Drive Terminal 2 Specifies the number of repetitions of the buzzer drive with n. The buzzer will not ring while printing. This command is prohibited for uses other than to ring the buzzer. (If this command is used to drive the cash drawer on models that have an external device terminal, the system will be damaged. Absolutely never use it for other purposes.) The buzzer can be stopped by pressing the paper feed switch or opening the cover when it is ringing. Conditions must not be set in advance with the external buzzer drive pulse condition command m n1 n2 prior to entering the raster mode. n is expressed in decimal (maximum 255 digits) using ASCII characters. Invalid in page mode. Example: STAR Line Mode Command Specifications 3-82