Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 335
H represents %0 25H 30H
View all Oki OKIPOS408II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 335 highlights
5-2-4 Code 128 These are bar code symbols that can print ASCII 128 characters. For that reason, use thereof is increasing. 1. Each module and module widths Item Mode 1 Module Width 2 Dots Length of 1 Character (*) 2.75 mm (*) Start and stop bars not included. Mode 2 3 Dots 4.125 mm Mode 3 4 Dots 5.5 mm 2. Regulations When using with the command, control codes are not sent by the host PC, so the control codes are sent as data, as shown below. • When sending the following data, it represents a 2 character set. % (25H) represents %0 (25H 30H). Control codes (00H to 1FH) represent 40H to 5FH applied behind %. Control code (7FH) represents %5 (25H 35H). Function codes represent 1 to 4 (31H to 34H) applied behind %. Start codes represent 6 to 8 (36H to 38H) applied behind %. • Stop code (SC)/Check character (CK) are automatically applied. • When the start code is omitted: Uses START C when more than 4 digits continue after header. Uses START A when initial data other than numbers are the control code. Uses START B for other cases. _____ STAR Page Mode Command Specifications 5-8