Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 310

ESC ¥ 4 n [Name] [Code] Initialize presenter paper counter ASCII ESC ¥ 4 n Hex. 1B 5C 34 n Decimal 27 92 52 n [Defined Area] [Initial Value] n = 0 n = 48 (n ="0") - - - [Function] Initializes the presenter paper counter (paper reel counter/paper recovery counter). Initialization of the paper counter using this command is executed when this command is processed. ESC GS SUB DC1 m t1 t2 [Name] Specify snout operation mode [Code] ASCII ESC GS SUB DC1 m t1 t2 Hexadecimal 1B 1D 1A 11 m t1 t2 Decimal 27 29 26 17 m t1 t2 [Defined Area] 0 ≤ m ≤ 3, 48 ≤ m ≤ 51 ("0" ≤ m ≤ "3") t1 = 0, t2 =0 [Initial Value] MSW Setting [Function] Specify the snout operation mode using the m parameter. m Snout Operating Mode 0、48 Snout LED operation OFF 1、49 Snout LED operation ON (while printing, or during presenter operation) 2、50 Snout LED operation ON (during an error) 3、51 Snout LED operation ON (while printing, or during presenter operation or an error) This command is valid when a presenter is connected. When the snout is not connected, this command is prohibited from use. _____ STAR Page Mode Command Specifications 3-69