Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 126
ESC GS * 0 n m1 m2 m3 … mk, cannot be included characters, bit images, bar codes, etc..
View all Oki OKIPOS408II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
ESC GS * 0 n m1 m2 m3 ... mk [Name] Print mark [Code] ASCII ESC GS * 0 n m1 m2 m3 Hex. 1B 1D 2A 30 n m1 m2 m3 Decimal 27 29 42 48 n m1 m2 m3 ... mk ... mk ... mk [Defined Area] [Initial Value] [Function] "001" ≤ n ≤ "255" "0" ≤ m ≤ "9" k = n - - Prints the mark number specified by m, based on the mark format (mark height, mark line feed amount, each mark color, and each mark horizontal width) that is preset. n indicates the number of marks to print; If the number of marks is 10 (m1 to m10), n = "010." m specifies the mark number to print. n and m are ASCII character strings that are represented by decimals; They are composed of character codes "0" to "9." This command is ignored if there is print data in the image buffer. Therefore, other characters cannot be included (characters, bit images, bar codes, etc.). If there is no mark specified in the remaining print region, the number of bytes specified by n are discarded. Also, if the value of n is out of the defined range, subsequent data are processed as normal data. This command is affected by position alignment, left margin, moved position, positions such as horizontal tab and upside down printing. Invalid in page mode. STAR Line Mode Command Specifications 3-108