Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 73
ETB, ESC RS E n
View all Oki OKIPOS408II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
ETB [Name] [Code] Update ASB ETB status ASCII ETB Hex. 17 Decimal 23 [Defined Area] [Initial Value] [Function] - - - - Spec. Aifications Sets the ASB ETB status when reading this command from the reception buffer, then sends ASB. See Appendix 2, ASB Status for details. Spec. Bifications Sets the ASB ETB status when reading this command from the reception buffer. Then, after updating the ASB ETB counter, sends the ASB status. See Appendix 2, ASB Status for details. The following outlines the details of processes in this command. (1) Reads ETB command from reception buffer. (2) Waits for printing of the print data before the ETB command to end. (3) Increments the ASB ETB counter by 1 after checking that printing has ended, then sets the ASB ETB status. (4) Sends ASB (only when ASB is enabled). • Precautions when using Ethernet When multi-session is valid the ASB (ETB counter) sent by is sent to all hosts that are connected. For that reason, sending ETB from multiple sessions, can cause mis-recognition of the ETB counter. Therefore, we recommend the commands to confirm the print end counter. See the Command List by Model. ESC RS E n [Name] Initialize ASB ETB counter and ETB status [Code] ASCII ESC RS E n Hex. 1B 1E 45 n Decimal 27 30 69 n [Defined Area] [Initial Value] [Function] n = 0 n = 48 ("0") ASB ETB counter = 0 Clears the ASB ETB counter to zero, then clears the ETB status. However, ASB status is not send when clearing the ETB counter to zero using this command. The ETB counter and ETB status are initialized by the following command, not this command. • Cancel print data and initialize command STAR Line Mode Command Specifications 3-55