Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 286

ESC RS r n [Name] [Code] Set printing speed ASCII ESC Hex. 1B Decimal 27 RS r n 1E 72 n 30 114 n [Defined Area] [Initial Value] 0 ≤ n ≤ 3 48 ≤ n ≤ 51 ("0" ≤ n ≤ "3") Memory switch setting [Function] Sets print speed. This command stops printing to be executed. Because two-color print mode, low peak current mode, and double resolution mode print in one speed, the speed settings with this command are invalid. This command setting becomes valid when returned from the two-color print mode, low peak current mode, and double resolution mode to the single color print mode. Spec. A n 0, 48 1, 49 2, 50 3, 51 Print Speed High speed Mid-speed Slow speed Option-speed (This speed varies according to the model.) Spec. B n 0, 48 1, 49 2, 50 3, 51 Print Speed Single Color Printing Mode Two-Color Printing Mode High speed Two-color print mode speed Mid-speed Two-color print mode speed Slow speed Two-color print mode speed Option-speed (This speed varies according to the model.) Two-color print mode speed There is one print speed in two-color print mode, so the speed set by this command is invalid. This command is valid when recovering from two-color print mode to single-color print mode. Spec. C n 0, 48 1, 49 2, 50 3, 51 Single Color Printing Mode Standard Mid-speed Slow speed High speed Print Speed Two-Color Printing Mode Low Peak Current Mode Double Resolution Mode (*) Installed print mode depends on the model. Each print mode speed Each print mode speed Each print mode speed Each print mode speed _____ STAR Page Mode Command Specifications 3-45