Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 123
ESC GS SUB DC3 m t1 t2, Snout LED output
View all Oki OKIPOS408II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
ESC GS SUB DC3 m t1 t2 [Name] Snout LED output [Code] ASCII ESC GS SUB DC3 m t1 t2 Hexadecimal 1B 1D 1A 13 m t1 t2 Decimal 27 29 26 19 m t1 t2 [Defined Area] 1 ≤ m ≤ 2, 49 ≤ m ≤ 50, ("1" ≤ m ≤ "2") 0 ≤ t1 ≤ 255, 0 ≤ t2 ≤ 255 [Initial Value] --- [Function] Outputs Snout LED. m specifies the snout LED output terminal. m LED output terminal 1, 49 External output terminal 1 2, 50 External output terminal 2 t1 specifies the ON time for snout LED output. When 1 ≤ t1 ≤ 255: ON time = t1 x 50 msec When t1 = 0: When ON time is default value (t1=2) t2 specifies the OFF time for snout LED output. When 0 ≤ t2 ≤ 255: OFF time = t2 x 50 msec When t2 = 0: When OFF time is default value (t2=2) This command is valid when a presenter is connected. When the snout is not connected, this command is prohibited from use. This command has priority if received while outputting the snout LED in the operation mode specified by the m t1 t2 command. STAR Line Mode Command Specifications 3-105