Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 255

ESC P C n1n2 ; x1x2x3x4 , y1y2y3y4 , w , h , c , r1r2 , d1d2 LF NUL [Name] [Code] Define character string formats (Specifications A and B) ASCII ESC P C n1 n2 ; x1 x2 x3 x4 , y1 Hex. 1B 50 43 n1 n2 3B x1 x2 x3 x4 2C y1 Decimal 27 80 67 n1 n2 59 x1 x2 x3 x4 44 y1 y2 y3 y4 , y2 y3 y4 2C y2 y3 y4 44 ASCII Hex. Decimal w , w 2C w 44 h, h 2C h 44 c , r1 r2 , d1 d2 LF NUL c 2C r1 r2 2C d1 d2 0A 00 c 44 r1 r2 44 d1 d2 10 0 [Defined Area] [Initial Value] 48 ≤ n1 ≤ 57 ("0" ≤ n1 ≤ "9"), 48 ≤ n2 ≤ 57 ("0" ≤ n2 ≤ "9") "00" ≤ n1 n2 ≤ "99" 49 ≤ w ≤ 54 ("1" ≤ w ≤ "6") 49 ≤ h ≤ 54 ("1" ≤ h ≤ "6") 49 ≤ c ≤ 53 ("1" ≤ c ≤ "5") 48 ≤ r1 ≤ 51 ("0" ≤ r1 ≤ "3") 48 ≤ r2 ≤ 51 ("0" ≤ r2 ≤ "3") 48 ≤ d1 ≤ 57 ("0" ≤ d1 ≤ "9"), 48 ≤ d2 ≤ 57 ("0" ≤ d2 ≤ "9") "00" ≤ d1 d2 ≤ "63" 48 ≤ x1 ≤ 57 ("0" ≤ x1 ≤ "9"), 48 ≤ x2 ≤ 57 ("0" ≤ x2 ≤ "9"), 48 ≤ x3 ≤ 57 ("0" ≤ x3 ≤ "9"), 48 ≤ x4 ≤ 57 ("0" ≤ x4 ≤ "9") 48 ≤ y1 ≤ 57 ("0" ≤ y1 ≤ "9"), 48 ≤ y2 ≤ 57 ("0" ≤ y2 ≤ "9"), 48 ≤ y3 ≤ 57 ("0" ≤ y3 ≤ "9"), 48 ≤ y4 ≤ 57 ("0" ≤ y4 ≤ "9") See Appendix 4 because the x1 x2 x3 x4, y1 y2 y3 y4 values are different for each printer model. d1 d2 = "00" [Function] Parameter details • n1 n2: • x1 x2 x3 x4: • y1 y2 y3 y4: • w: • h: • c: • r1: • r2: • d1 d2: Character string number Print starting X direction position Unit 0.1 mm Print starting Y direction position Unit 0.1 mm Character width magnification (1, 2, 3, 4, 5, 6 magnifications) Character height magnification (1, 2, 3, 4, 5, 6 magnifications) Character type (dot unit character size) (1: Small characters (8 * 16) / 2: Standard characters (16 * 24) / 3: Chinese characters (12 * 24/24 * 24) / 4: Bold characters (24 * 32)) Direction of character rotation (0:0°, 1:90°, 2:180°, 3: 270° Direction of character string rotation (0:0°, 1:90°, 2:180°, 3: 270° Character pitch units Unit Dots The previous "," may be omitted. ", d1 d2" may be omitted. (If omitted, the setting value of "ESC Y" is used.) Defines character string format (print position, size, character type and direction of rotation). The upper left of the character face is the reference position for expansion, which does not change even when expanded. Rotation is done clockwise around the reference point. Character pitch does not expand when characters are expanded. Settings using this command are cleared by the format initialization command (ESC C). When Chinese characters or OCR characters are specified, international characters are invalidated. When OCR or bold characters are specified, ASCII Katakana characters are invalidated. _____ STAR Page Mode Command Specifications 3-14