Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 154
ESC GS P 1, ESC GS P 2 n
View all Oki OKIPOS408II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
ESC GS P 1 [Name] Cancel page mode [Code] ASCII ESC GS Hexadecimal 1B 1D Decimal 27 29 P1 50 31 80 49 [Function] Cancels page mode. • Valid only when input in page mode. • Data expanded in page mode is erased. • After execution, the top of the line is positioned at the next print starting position. • Print region set by ESC GS P 3 (Set print region in page mode) is initialized. • Switches the following command setting values that have independent values for both standard and page modes to the setting values of standard mode. • Set space amount: ESC SP , ESC: , ESC M, ESC P, ESC g, ESC p, ESC s, ESC t • Set the line feed amount: ESC z, ESC 0, ESC 1, ESC 2, • Set horizontal tab: ESC D • The following commands are valid only when set in standard mode. • ESC GS P 3: Set print region in page mode • ESC GS P 2: Select character print direction in page mode • The following commands are ignored in standard mode. • ESC GS P 4: Specify character vertical direction absolute position in page mode • ESC GS P 5: Specify character vertical direction relative position in page mode • ESC GS P 6: Print data in page mode • ESC GS P 7: Print in page mode and recover • ESC GS P 8: Cancel print data in page mode • When power is turned on and when a reset is implemented, standard mode is selected when executing initialization (ESC @) of the printer. ESC GS P 2 n [Name] Select character print direction in page mode [Code] ASCII ESC GS P 2 Hexadecimal 1B 1D 50 32 Decimal 27 29 80 50 [Defined Area] [Initial Value] [Function] 0 ≤ n ≤ 3, 48 ≤ n ≤ 51 n = 0 Select character print direction and starting point in page mode. STAR Line Mode Command Specifications 3-136