Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 132
ESC GS / W, ESC GS / C
View all Oki OKIPOS408II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
ESC GS / W [Name] Register Auto Logo setting to non-volatile memory [Code] ASCII ESC GS / W Hex. 1b 1d 2f 57 Decimal 27 29 47 87 [Defined Area] [Initial Value] [Function] - - - - Registers Auto Logo setting to non-volatile memory After registration, the printer is reset. This command is ignored when Auto Logo is being executed. ESC GS / C [Name] Initialize Auto Logo setting to non-volatile memory [Code] ASCII ESC GS / C Hex. 1b 1d 2f 43 Decimal 27 29 47 67 [Defined Area] [Initial Value] [Function] - - - - Initializes registered data in the non-volatile memory of the Auto Logo function. After initialization, the printer is reset. This command is ignored when Auto Logo is being executed. The default values of the Auto Logo function are below. Setting Initial Value Auto Logo Function OFF Command Character None User Macro 1 None User Macro 2 None Command Character Switch No print Partial Cut Before Auto Logo Printing Disabled STAR Line Mode Command Specifications 3-114