Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 247

ESC D n1n2n3n4 LF NUL [Name] [Code] Set print area ASCII ESC D n1 n2 n3 n4 LF Hex. 1B 44 n1 n2 n3 n4 0A Decimal 27 68 n1 n2 n3 n4 10 NUL 00 0 [Defined Area] [Initial Value] 48 ≤ n1 ≤ 57 ("0" ≤ n1 ≤ "9"), 48 ≤ n2 ≤ 57 ("0" ≤ n2 ≤ "9"), 48 ≤ n3 ≤ 57 ("0" ≤ n3 ≤ "9"), 48 ≤ n4 ≤ 57 ("0" ≤ n4 ≤ "9") See Appendix 4 because the n1 n2 n3 n4 values are different for each printer model. - - - [Function] Defines the print area (the image memory vertical size (in units 0.1 mm) targeted for printing). When the TOF function is enabled, this specifies a value smaller than the paper pitch. In this case, having an approximately 5 mm margin is preferred. (This is because when set to a value larger than the paper pitch, print data is printed to two sheets if there is variation in the black mark printing position or detection.) Settings using this command are cleared by the format initialization command (ESC C). When switching the reception mode of the 2-color print setting/cancel command (ESC RS C), the settings made by this command are cleared. _____ STAR Page Mode Command Specifications 3-6