Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 160

3.17. Text Search Command Details ESC GS ) B pL pH fn [parameter] [Name] Set text search [Code] ASCII ESC ) B pL pH fn [parameter] Hexadecimal 1B 29 42 pL pH fn [parameter] Decimal 27 41 66 pL pH fn [parameter] [Function] Runs processes related to text search. • pL and pH specify the parameter count (pL + pH x 256) in bytes after fn. • See the function specifications for details on [parameter]. fn Function No. Function Name 48 Function 48 Enable and disables text search 49 Function 49 Set the number of times to run the text search macro 50 Function 50 Set to print the string that matches in the text search 64 Function 64 Define the text search string 65 Function 65 Define the text search macro 80 Function 80 Register text search settings and definitions in the non-volatile memory 81 Function 81 Initialize text search settings and definitions 96 Function 96 Print the text search settings and definitions 97 Function 97 Run the text search macro ESC GS ) B pL pH fn m [Name] Enable and disables text search [Code] ASCII ESC GS ) B pL pH fn m Hexadecimal 1B 1D 29 42 pL pH fn m Decimal 27 29 41 66 pL pH fn m (fn = 48) [Defined Area] [Initial Value] [Function] pL = 2, pH = 0 fn = 48 m = 0, 1 Depends on setting registered in the non-volatile memory (At the time of shipment: m = 0) Makes text searches valid or invalid. m Set 0 Invalid 1 Valid When text search is valid, determines whether a string registered in the printer in advance is in the print data. If it is included, run a text search macro that corresponds to that string after running the following trigger command. • Execute cuts by continous . • "d" No setting when the parameter is not a valid value. This setting is applied to printer operations when this command is processed. This setting is registered to non-volatile memory by the ESC GS ) B