Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 137
ESC GS / 6 n, Partial Cut
View all Oki OKIPOS408II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
ESC GS / 6 n [Name] Set partial cut before Auto Logo printing [Code] ASCII ESC GS / 6 n Hex. 1b 1d 2f 36 n Decimal 27 29 47 54 n [Defined Area] [Initial Value] [Function] 0 ≤ n ≤ 1 n = 0 Sets a partial cut before the Auto Logo printing. This command is registered to the non-volatile memory by the " / W" command. This command is ignored when Auto Logo is being executed. n Setting 0 Does not execute a partial cut before the Auto Logo printing. 1 Executes a partial cut before the Auto Logo printing. When printing Logo2 and Logo3 as Auto Logo printing like the one in the drawing below, this command selects to execute a partial cut before printing Logo2 of the Auto Logo and Logo3. If a partial cut is executed using this function, it is possible to provide coupons, etc., that are printed using Auto Logo with a partial cut. 1. Starts Auto Logo with trigger o f cutting command. 2. Executes user m acro 1. 3. Prints Auto Logo 4. Executes user m acro 2. - Executes cut. - Executes Header logo printing. Header MMAACCDDOONNAALLDDSS 1.CHEEEESSBEUBGUERGER$2$.200.00 22..CCOOKKEE $1$.010.00 -T--O----T---A---L 3---.-0-0-- TOTAL $3.00 CheHeesaedebrurger COKE Partial Cut Prints Logo 2 Partial Cut Prints Logo 3 Header MACDONALDS STAR Line Mode Command Specifications 3-119