Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 292

ESC k n x1x2x3x4 , y1y2y3y4 LF NUL [Name] [Code] Define dot graphics data (Specification A) ASCII ESC k n x1 x2 x3 x4 , y1 y2 y3 y4 LF Hex. 1B 6B n x1 x2 x3 x4 2C y1 y2 y3 y4 0A Decimal 27 107 n x1 x2 x3 x4 44 y1 y2 y3 y4 10 NUL 00 0 [Defined Area] [Initial Value] n = 58, 59 (n 48 ≤ x1 ≤ 57 ("0" ≤ x1 ≤ "9"), 48 ≤ x2 ≤ 57 ("0" ≤ x2 ≤ "9"), 48 ≤ x3 ≤ 57 ("0" ≤ x3 ≤ "9"), 48 ≤ x4 ≤ 57 ("0" ≤ x4 ≤ "9") 48 ≤ y1 ≤ 57 ("0" ≤ y1 ≤ "9"), 48 ≤ y2 ≤ 57 ("0" ≤ y2 ≤ "9"), 48 ≤ y3 ≤ 57 ("0" ≤ y3 ≤ "9"), 48 ≤ y4 ≤ 57 ("0" ≤ y4 ≤ "9") See Appendix 4 because the x1 x2 x3 x4, y1 y2 y3 y4 values are different for each printer model. - - - [Function] Parameter details • n: Print specifications (";" Duplicate/":" Overwrite) • x1 x2 x3 x4: Graphics data X axis direction starting address • y1 y2 y3 y4: Graphics data Y axis direction starting address Unit 0.1 mm Unit 0.1 mm Writes the dot graphics data registered by the dot graphics data registration command (ESC q or ESC h) to the flash memory to the image memory. To register definitions according to this command to the flash memory as formats, execute the format registration command (ESC w) after executing this command. However, only definitions according to this command (graphics data expansion information) is registered as a format. The graphics data registered to the flash memory at that point is expanded each time the format is loaded. This graphics data expanded to the image memory by this command is cleared by the format initialization command (ESC C) or the image memory clear command (ESC X). _____ STAR Page Mode Command Specifications 3-51