Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 301
Xon/Xoff mode, When resetting the printer, the following processes are performed.
View all Oki OKIPOS408II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 301 highlights
ESC ? LF NUL [Name] [Code] Reset printer (execute self print) ASCII ESC ? LF NUL Hex. 1B 3F 0A 00 Decimal 27 63 10 0 [Defined Area] - - [Initial Value] - - - [Function] Hardware resets the printer and executes on self print. After sending this command, the next data is not sent until the printer is online (in a state wherein it can receive data). When resetting the printer, the following processes are performed. I/F Parallel RS-232C Mode - - DTR mode Xon/Xoff mode Process BUSY output DTR mark output Xoff output _____ STAR Page Mode Command Specifications 3-60
____________________________________________________________________________________________________________________________________________
STAR Page Mode Command Specifications
3-60
ESC ? LF NUL
[Name]
Reset printer (execute self print)
[Code]
ASCII
ESC
?
LF
NUL
Hex.
1B
3F
0A
00
Decimal
27
63
10
0
[Defined Area]
- - -
[Initial Value]
- - -
[Function]
Hardware resets the printer and executes on self print.
After sending this command, the next data is not sent until the printer is online (in a state wherein it
can receive data).
When resetting the printer, the following processes are performed.
I/F
Mode
Process
Parallel
- - -
BUSY output
RS-232C
DTR mode
DTR mark output
Xon/Xoff mode
Xoff output