Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 308
ESC ¥ 0 n, Presenter Command Details
View all Oki OKIPOS408II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
3-4 Presenter Command Details The following outlines the commands relating to the presenter. These commands are valid only on machines connected to a presenter. ESC ¥ 0 n, ESC ¥ NUL n [Name] [Code] Execute presenter paper recovery ASCII ESC ¥ 0 n , ESC ¥ NUL n Hex. 1B 5C 30 n , 1B 5C 00 n Decimal 27 92 48 n , 27 92 0 n [Defined Area] [Initial Value] n = 0 n = 48 (n ="0") - - - [Function] Executes presenter paper recovery. This command is ignored when a presenter is not connected. Also, this command is executed when paper is supplied by the presenter, exists in the presenter and the paper has been cut. This command is ignored with under all other conditions. (Ignored when paper is being recovered.) ESC ¥ 1 n [Name] [Code] Set presenter paper automatic recovery function and automatic recovery time ASCII ESC ¥ 1 n Hex. 1B 5C 31 n Decimal 27 92 49 n [Defined Area] 0 ≤ n ≤ 255 [Initial Value] Memory switch setting [Function] Sets presenter paper automatic recovery function and automatic recovery time. This command is ignored when a presenter is not connected. Settings using this command are effective from the next sheet when the printer processes this command and paper has already been supplied to the presenter. n n = 0 1 ≤ n ≤ 255 Function Paper automatic recovery function invalid. Paper automatic recovery function valid. Automatic recovery time: n x 0.5 sec (0.5 sec to 127.5 sec) _____ STAR Page Mode Command Specifications 3-67