Oki OKIPOS408II OKIPOS 408II Programmer s Technical Reference - Page 136
ESC GS / 5 n, Does not print the command character and the following logo number
View all Oki OKIPOS408II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
ESC GS / 5 n [Name] Set command character switching method [Code] ASCII ESC GS / 5 n Hex. 1b 1d 2f 35 n Decimal 27 29 47 53 n [Defined Area] [Initial Value] [Function] 0 ≤ n ≤ 1 n = 0 Sets the Auto Logo function command character switching method. This command is registered to the non-volatile memory by the " / W" command. This command is ignored when Auto Logo is being executed. n Setting 0 Does not print the command character and the following logo number 1 Switches the command character and the following logo number into a space character (0 x 20) When "/" is specified as the command character, the "/2" embedded in the print data is not a character string, but processed as a command. At this time, "/2" is processed as a command is not printed. However, by specifying n = 1 in this command, it is possible to switch "/2" to a space. STAR Line Mode Command Specifications 3-118