Panasonic AJHPX2700G AJHPX2700G User Guide - Page 106

If the following messages are displayed when the jog dial button is pressed, the data cannot be deleted. Error message Measures DELETE NG NO CARD (No SD memory card is inserted) Insert an SD memory card. DELETE NG ERROR (Data cannot be deleted) It is assumed that the SD memory card is defective. Replace the card. DELETE NG Eject the SD memory card and WRITE PROTECT release write protection. (The SD card is write protected) DELETE NG CANNOT ACCESS (It is impossible to access the data) It is impossible to access the SD memory card while the card is in use. After completion of the respective operations, perform the delete operation again. DELETE NG NO FILE (No file is available) Select the file No. containing astigmatism files and perform the delete operation. 7 Move the arrow (cursor) to YES by turning the jog dial button and then press the jog dial button. When the write operation is completed, the following message is displayed. When CAC file does not operate properly The following error messages are displayed in the viewfinder when CAC does not operate properly or CAC files cannot be read properly. Error message Meanings Measures FILE MEMORY FULL When the CAC file is read from the SD memory card to memory in the unit in EMPTY mode, the built-in memory is full. Read the CAC file in a mode other than EMPTY mode. CAC FILE DATA NOT FOUND When the CAC function is set to ON and no CAC file applicable to the connected lens is available. This is displayed when the power of the unit is turned on. Read the CAC file that is applicable for the lens to be used. CAC LENS DATA INVALID When the unit cannot respond to the return data from the lens, or when any responses other than ones as defined in the CAC file are returned. This lens does not support CAC correction. Although it cannot execute CAC correction, using this lens presents no problems. LENS INITIALIZE NOT COMPLETED Initialization of the lens position detection (focus/zoom) in the encoder type is not completed yet. Turn the focus/zoom ring to through the intermediate point of the operation range. Notes When lens optical accessories (converter lens, attachment) are installed, the CAC may not operate properly due to changes in the optical characteristics of the lens. In this case, turn off the CAC function. When focus servo is used with Canon lenses, data must be recorded after initialization in the automatic initialization mode. The state where the focus ring is moving may be recorded. When the CAC does not operate and no error message is displayed, the version of the software for the lens may be out of date and invalid. Please contact the lens manufacturer. 106 Adjustments and Settings for Recording: Chromatic Aberration Compensation (CAC)