Panasonic AJHPX2700G AJHPX2700G User Guide - Page 175
High Setting, Additional Dtl
View all Panasonic AJHPX2700G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Menu HIGH SETTING Items/ Adjustable Data Saved Range Remarks MASTER GAIN -3dB : 6dB : 30dB Select the master gain from -3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, or 30 dB. SCUF - H.DTL LEVEL 00 : 05 : 63 SCUF - For performing the horizontal detail correction level setting. V.DTL LEVEL 00 : 07 : 31 SCUF - For performing the vertical detail correction level setting. DTL CORING 00 : 12 : 60 SCUF - For performing the noise elimination level setting for detail. H.DTL FREQ. 00 : 18 : 31 SCUF - For performing the horizontal detail frequency selection. LEVEL DEPEND. 0 : 3 : 5 SCUF - For setting the LEVEL DEPEND. When the Y-detail is emphasized, details of dark sections are compressed. If the numerical value is larger, details of bright sections are also compressed. MASTER 0.30 GAMMA : 0.45 : 0.75 SCUF - For setting the master gamma. (0.01 step) BLACK GAMMA -8 : OFF : +8 For setting the gamma curve for the dark portion. -8 to -1: The dark portion is compressed. OFF: Standard state +1 to +8: The dark portion is extended. SCUF - B.GAMMA 1 RANGE 2 3 For setting the upper limit of compression/expansion. 1: Approximately 20% 2: Approximately 30% 3: Approximately 40% SCUFR MATRIX OFF TABLE A B SCUF - For selecting the color correction table for the linear matrix. COLOR ON CORRECT OFF For switching on/off of the 12-axis independent color correction. SCUF - Note The items indicated by are the setting items for PAINT MENU SW() R/W in the screen. The items without are the setting items for PAINT MENU LEVEL R/W. Please refer to [SD CARD R/W SELECT] (page 195) for more information. ADDITIONAL DTL Items/ Adjustable Data Saved Range Remarks KNEE APE LVL OFF 1 : 5 SCUFR For changing the detail level of the high brightness portion. DTL GAIN(+) -31 : +00 : +31 SCUFR Adjust the detail level toward + (upwards). DTL GAIN(-) -31 : +00 : +31 SCUFR Adjust the detail level toward the - (downwards). DTL CLIP 00 : 54 : 63 For setting the level for clipping the detail signals. SCUF R DTL SOURCE (R+G)/2 (G+B)/2 2G+R+B /4 (3G+R)/4 R G SCUFR For setting the proportion of the RGB signal components that provide the detail. V DTL FREQ 360TV 450TV 540TV 630TV 720TV SCUFR For selecting the vertical detail frequency. The frequency notation is the value converted in 720P. H.DTL LINE MIX 0H 1H 2H For setting the number of scanning lines to be added to the video signals in order to generate the horizontal detail signals. SCUFR MASTER DTL -31 : +00 : +31 SCUFR For revising the master detail level. Menu: Menu Description Tables 175