Panasonic AJHPX2700G AJHPX2700G User Guide - Page 193
MIC/AUDIO2, TC/UB, Items, Data Saved, Adjustable, Range, Remarks, SINGLE, FRM RATE, REGEN
View all Panasonic AJHPX2700G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Menu MIC/AUDIO2 Items/ Adjustable Data Saved Range Remarks FRONT MIC ON POWER OFF Select the phantom power supply for the front microphone. -CUF - REAR MIC ON POWER OFF Select the phantom power supply for the rear microphone. When "OFF" is selected, no phantom power is supplied even if the LINE/MIC/ +48V selector switch is set to [+48V]. -CUF - MONITOR SELECT STEREO MIX When the MONITOR select switch is set to [ST] (stereo), select the signal format for the monitor output. -CUF - FRONT MIC LEVEL -40dB -50dB -CUF - Select the front microphone input level. REAR MIC CH1 -50dB LVL -60dB -CUF - Select the rear microphone input level. REAR MIC CH2 -50dB LVL -60dB -CUF - Select the rear microphone input level. REAR LINE IN -3dB LVL 0dB +4dB -CUF - Select the rear line input level. AUDIO OUT LVL -3dB 0dB +4dB -CUF - Select the audio output level. HEADROOM 18dB 20dB -CUF - Set the headroom (standard level). WIRELESS ON WARN OFF Select whether or not to enable the alarm to trigger for poor wireless receiver reception. -CUF - WIRELESS TYPE SINGLE DUAL Select the type of wireless receiver. SINGLE: Select a single channel wireless receiver. DUAL: Select a 2-channel wireless receiver. -CUF - TC/UB Items/ Adjustable Data Saved Range Remarks TC MODE DF NDF -CUF - Set the time code mode. DF: Drop frame. NDF: Non drop frame. Note When the unit operates at 50 Hz or in 24P or 24PA mode, the non-drop frame is always used. UB MODE USER TIME DATE EXT TCG FRM RATE REGEN Select the user bits mode. USER: Select UB value set in the LCD section. TIME: Select local time (hours, minutes, seconds). DATE: Select local date and time (2 last digits of year, month, date, time). EXT: The user bits input to the TC IN connector are recorded. If reading fails, USER value is retained. TCG: TCG value enters UB. FRM RATE: Select the shooting information (e.g. frame rate) for the camera. For more information, see [Frame rate information recorded in user bits] (page 63). When clips recorded in native mode are played back, the frame rate information recorded in users bits in the VAUX area is output. REGEN: Read out value stored in the card and record value continuously. Note When the unit is in 720P mode, "FRM RATE" is always selected. -CUF - Menu: Menu Description Tables 193