Panasonic AJHPX2700G AJHPX2700G User Guide - Page 11

General Approximate Proxy Recording Time (optional) on SD memory cards (Except for 24P native mode) Card No. (Card Capacity) MPEG4 recording rate 192 kbps 768 kbps 1500 kbps RP-SDH256 (256 MB) Approx. 2 h 17 min Approx. 35 min Approx. 19 min RP-SDH512 RP-SDK512 (512 MB) Approx. 4 h 27 min Approx. 69 min Approx. 38 min RP-SDQ01G RP-SDK01G (1 GB) Approx. 8 h 56 min Approx. 2 h 19 min Approx. 77 min RP-SDQ02G RP-SDK02G (2 GB) Approx. Approx. 18 h 11 min 4 h 44 min Approx. 2 h 37 min RP-SDV024G (SDHC 4 GB) Approx. Approx. 35 h 42 min 9 h 18 min Approx. 5 h 12 min (Reference values when Panasonic bland SD memory cards or SDHC memory cards are used for continuous recording. Actual recording time depends on the kind of scenes and the number of clips.) The values for 8 GB and 16 GB SDHC memory cards are double and four times the values for the 4 GB card. For the latest information on P2 cards and SD memory cards not available in the operating instructions, visit the P2 Support Desk at the following Web site. https://eww.pavc.panasonic.co.jp/pro-av/ Features of the Input/Output unit Independent HD SDI output provided as a standard configuration The HD SDI signals output from the HD SDI A · B connectors and the MON OUT connector are independent. Characters and markers can therefore be set independently (note that the same signal is output from the HD SDI A connector and the HD SDI B connector). SDI output includes embedded audio etc. Features USB 2.0 port (HOST/DEVICE) By connecting with a PC via USB 2.0, a P2 card inserted in the unit can be used as a bulk storage device. Also, since this unit has a USB HOST capability, it is possible to store P2 card data on an external hard disk connected using USB 2.0, to view clips stored on the hard disk and to write clips stored on the hard disk to the P2 card. DVCPRO output provided as a standard configuration Data can be output to an external device through the IEEE1394 digital interface. Use a 6-pin type connector. The unit does not support the bus power. While operating AVC-Intra, it is impossible to output data with IEEE1394. Down converter output provided as a standard configuration The MON OUT connector outputs down converter (analog composite) signals. Also, output signal from the MON OUT connector can be switched between an HD SDI signal and a VBS signal. Remote control connector By connecting the remote control unit (AJ-RC10G), which is available as an optional accessory, the unit can be controlled remotely. (Refer to page 117) Confirmation of return video signals It is possible to confirm the return video signals (analog HD Y signals) supplied to the GENLOCK IN connector of the unit in the viewfinder to confirm programs. Only video signals from the same record format can be confirmed. Note also that the 23.98PsF and 24PsF signals cannot be confirmed. (Refer to page 187) DC OUT connector The DC OUT connector of the unit produces 1.5 A of electrical current. By connecting an external switch to this connector, it is possible to control recording start/stop. Since a tally lamp can be used by connecting the LED to this connector, it is useful for shooting video when fixing the camera on a crane. (Refer to page 119) Other features Viewfinder connection From the viewfinder connector of the unit, 1080-59.94i, 1080-50i signals are output. Confirm images in multi formats by connecting the viewfinder (AJ-HVF21G), which is available as an optional accessory. (Refer to page 28) User button On the side panel of the unit, 5 user buttons (USER MAIN/ USER 1/USER 2/MARKER SELECT/TEXT MEMO) are available. Each user button can be assigned the on/off function for any frequently used feature among the many features of the unit, such as SLOT SEL and Y GET. (Refer to page 56) 11 General: Features of the Input/Output unit