Panasonic AJHPX2700G AJHPX2700G User Guide - Page 92
To write data on a selected file, Error message, Remedy
View all Panasonic AJHPX2700G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
6 Turn the jog dial button until a desired character appears. The characters that appear are switched in the following order: Space: Ð Alphabetical characters: A to Z Ð Numerals: Ð 0 to 9 Symbols: 7 Press the jog dial button to accept a desired character. 8 Turn the jog dial button to move the arrow (cursor) to the next digit (clockwise), and repeat steps 6 - 7 to set characters (up to 8 characters). To write data on a selected file 9 When the title is set, turn the jog dial button to move the arrow (cursor) to : . The data will not be written if any of the following messages appears when the jog dial button is pressed: Error message Remedy WRITE NG Insert an SD memory card. NO CARD (No SD memory card inserted.) WRITE NG FORMAT ERROR (SD memory card not properly formatted.) The card has not been formatted using the unit. Replace the card. WRITE NG The card may be defective. ERROR Replace the card. (SD memory card not writable.) WRITE NG WRITE PROTECT (SD memory card writeprotected.) Remove the card and disable the protect. WRITE NG CANNOT ACCESS (SD memory card not accessible.) It is impossible to access the SD memory card while the card is in use. After completion of the respective operations, perform the write operation again. WRITE NG CARD FULL (SD memory card has no free space.) The card is not writable because it has no free space. Delete unwanted files or replace the card with a new one. 13 Turn the jog dial button to move the arrow (cursor) to YES. Then, press the dial button. When the data has been written, the following message appears: 10 Press the jog dial button to return the arrow (cursor) to the option TITLE. 11 Turn the jog dial button to move the arrow (cursor) to the option WRITE. 12 Press the jog dial button to display the following message: 14 To exit the menu, press the MENU button. The settings menu disappears and the status of the unit is indicated at the top and bottom of the viewfinder screen. Notes The screen can be used to select the type of the menu to be written on the SD memory card. It is possible to overwrite a setup file stored by a different device with a new setup file from this unit. Note that if the file is overwritten, the original setup file from the other device will be lost. We recommend managing the respective SD memory cards on the respective devices independently. 92 Adjustments and Settings for Recording: Handling data