Panasonic AJHPX2700G AJHPX2700G User Guide - Page 180

VF MARKER VF USER BOX Items/ Adjustable Data Saved Range Remarks TABLE A B Select the VF MARKER setting table. First, select table "A" or "B", then set the items below for each table. - CU F R CENTER MARK OFF 1 2 3 4 Switch the center mark. OFF: Do not display center mark. 1: + (large) 2: Hollow (large) 3: + (small) 4: Hollow (small) - CU F R SAFETY MARK OFF 1 2 Select the frame type for the safety zone. OFF: Do not display frame. 1: Box 2: Corner frame - CU F R SAFETY AREA 80% : 90% : 100% - CU F R FRAME MARK ON OFF - CU F R FRAME SIG 4:3 13:9 14:9 VISTA CNSCO - CU F R FRAME LVL 0 : 15 - CU F R For setting the size of the safety marker. It is possible to set the size by units of 1% with a fixed ratio between of width and height. Set the frame marker to "ON" or "OFF". Set the frame marker. The VISTA ratio is 16:8.65. (1.85:1) The CNSCO ratio is 16:6.81 (2.35:1). Set the level outside the frame marker. Note that the level does not change on the LCD monitor. 0: Equivalent to signal off. (Blanking status) 15: Same brightness as center area. Items/ Adjustable Data Saved Range Remarks USER BOX ON OFF For setting whether the user box is displayed in the viewfinder or not. - CU F R USER BOX 1 WIDTH : 13 : 100 - CU F R For setting the width of the user box. USER BOX 1 HEIGHT : 13 : 100 - CU F R For setting the height of the user box. USER BOX H -50 POS : +00 : +50 - CU F R For setting the horizontal position of the user box center. USER BOX V -50 POS : +00 : +50 - CU F R For setting the vertical position of the user box center. The user box can be displayed in any position as a boxtype cursor. Note The user box is not displayed on the LCD monitor if "LTBOX" is selected in DOWNCON MODE. Note The safety zone marker, the safety zone area, and the frame marker are not displayed on the LCD monitor if "LT-BOX" is selected in DOWNCON MODE. 180 Menu: Menu Description Tables