Panasonic AJHPX2700G AJHPX2700G User Guide - Page 13
Color TV Standard Settings (Settings for frame frequency
View all Panasonic AJHPX2700G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
General Color TV Standard Settings (Settings for frame frequency) The unit is delivered with the color TV standard not yet specified. To revise the settings for frame frequency according to the preferred standard, refer to the procedures described below. 1 After connecting the unit to the power supply and then turning on the power, press the MENU button while pressing the LIGHT button to open OPTION MENU. 2 Turn the jog dial button to move the cursor (arrow) to the AREA SELECT item on the screen in OPTION MENU page, and then press the jog dial button. Notes The settings are not saved unless AREA SET is executed even if NTSC, NTSC (J), or PAL is selected in the AREA SELECT. When AREA SELECT is revised, the " AREA SET" blinks. When these items are set when the unit is used for the first time, only the following 8 items are revised. When the other settings of the unit are set in MAIN MENU, the menu setting values for items other than the following 8 are ones that were set at the factory. 3 Select the area among NTSC, NTSC (J), and PAL. After selecting the area by turning the jog dial button, press the jog dial button. 4 Move the cursor (arrow) to AREA SET by turning the jog dial button, and then press the jog dial button. The following window appears. Factory settings NTSC NTSC(J) PAL SYSTEM MODE 720-59.94P 720-59.94P 720-59.94P 720-50P REC FORMAT AVC-I 100 AVC-I 100 AVC-I 100 AVC-I 100 /24PN /24PN /24PN /25PN FRAME RATE 24FRAME 24FRAME 24FRAME 25FRAME USR SW F.RATE 24FRAME 24FRAME 24FRAME 25FRAME REAR LINE IN LVL +4dB +4dB +4dB 0dB AUDIO OUT LVL +4dB +4dB +4dB 0dB HEADROOM 20dB 20dB 20dB 18dB GUI metadata language indication American English American English Japanese/ For Japan American English LANGUAGE Not displayed Not displayed ENGLISH Not JAPANESE displayed DATE FORMAT*1 M-D-Y M-D-Y Y-M-D D-M-Y *1 Select THUMBNAIL SETUP DATE FORMAT from the thumbnail menu. For details refer to [Setting the Thumbnail Display Mode] (page 136). 5 Move the arrow () to YES and press the jog dial button. The settings selected in step 3 above are reflected in FACTORY and CURRENT data. 6 Turn off the power supply once and then turn on it again. 13 General: Color TV Standard Settings (Settings for frame frequency)