Panasonic AJHPX2700G AJHPX2700G User Guide - Page 76
Adjustments and Settings for Recording, Viewfinder Screen Status Displays, Unit REC indication
View all Panasonic AJHPX2700G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Information Item 1. System mode 2/43. Frame number for shooting and recording Indication 1080-59.9i 1080-23.9PsF 1080-24.0PsF 1080-50i 720-59.94P 720-60P 720-50P P: i At native recording P: PN 3. REC FORMAT 4/41. Shutter speed/ mode 5. P2 card remaining free space DVCPROHD AVC-I100 AVC-I50 X1/ . , X .d XX1/ . 1/50 (1/60) - 1/2000, HALF, .d min END WP LOOP INFO P2 / 6. P2 card remaining min free space (when MODE CHECK is being performed) 7. Unit REC indication REC Status This indicates the mode that the unit operates in. 1080-59.94 interlace mode 1080-23.98 segment frame mode 1080-24 segment frame mode 1080-50 interlace mode 720-59.94 progressive mode 720-60 progressive mode 720-50 progressive mode The shooting frame number is displayed next to the recording frame number (including native recording) and the recording type (progressive/interlacing). Examples: In the case of 24PN recording and 12 frame shooting, "12P:24PN" is displayed. In the case of 12P Over 59.94i, "12P:60i" is displayed. When the VFR function is "ON", the shooting frame number is displayed with black and white reversed. When operating in SYNCHRO SCAN mode, the shooting frame number blinks. This indicates the recording mode. Note DVCPROHD is also displayed in the native recording. DVCPRO HD recording (including native recording) AVC-Intra100 recording AVC-Intra50 recording This indicates that the shutter speed is set to SYNCHRO SCAN. This indicates that the shutter speed is set to SYNCHRO SCAN2. This indicates that a fixed shutter speed has been set. The indication " min" stays illuminated under normal conditions or blinks when the remaining level is near zero. When the card space is used up, "END" blinks. WP is illuminated when the P2 card is write-protected. LOOP is illuminated when the LOOP REC mode is set. When loop recording cannot be performed, for example because the P2 card has no free space, the indication blinks. P2 card being recognized. Total free space/capacities of the P2 cards (when MODE CHECK is being performed). Note When the menu option P2CARD REMAIN is set to "ONE-CARD", the number of the P2 card slot that contains the target card is indicated, together with the remaining space. For more information, see [P2 Card Remaining Free Space/capacity Indication] (page 82). With lower frame rates under VFR operation during native recording, the display period may lengthen for the indication that little space remains on the P2 card. The number of the P2 card slot that contains the target card and the remaining free space are indicated (when MODE CHECK is being performed). In LOOP REC mode, an indication of estimated recording time appears. For more information, see [Loop Recording] (page 40). This indication also appears when the target P2 card has been switched with a user button. Note Under VFR operation in native recording, the amount of free space increases as the frame rate is lowered. When an external device is controlled through the 1394 connection (when the 1394 CONTROL option is set to "BOTH"), the recording status of the unit is displayed using characters. The indication stays illuminated during recording. This is displayed when the menu option REC TALLY of the screen is set to "CHAR". This can also be displayed during the recording using the unit alone. This is displayed when the menu option REC STATUS of the screen is set to "ON". 76 Adjustments and Settings for Recording: Viewfinder Screen Status Displays