Panasonic AJHPX2700G AJHPX2700G User Guide - Page 158

Error Codes The following error codes are displayed in the display window if an error occurs in the camera: Confirm the type of warning and refer to the details in the [Warning Description Tables] (page 155) for countermeasures. Code No. Description E-11 Video initialization error E-27 Recording control error E-30 P2 card removal error E-34 LCD microcontroller error E-38 P2 streaming microcontroller error E-39 Abnormal initialization of the AVC-Intra codec E-3F Microprocessor error in the camera control circuit E-40 Image sequence error (in case of 24P, 30P and 25P), GENLOCK error E-63 Something is wrong with the system control microprocessor. E-6F Reference signal error. 00:00:00:11 Recording error on a P2 card Type of warnings 1. System Errors 1. System Errors 2. Card removal error 1. System Errors 1. System Errors 1. System Errors 1. System Errors 5. Image Sequence Error (24P, 30P, 25P) 1. System Errors 1. System Errors 6. Recording Error/11. P2 Card Error Card Warning Code Code No. Description Recording E-70 E-71 The directory structure on the P2 card is not supported. ([DIR NG CARD (Slot No.)] is indicated on the viewfinder.) Operation continues. However, back up data on the P2 card as soon as possible, and format the card before using it again. The maximum number of overwrites on the P2 card has been exceeded. ([RUN DOWN CARD (Slot No.)] is indicated on the viewfinder.) Operation continues. However, recording or playback may not operate correctly. It is recommended that you replace the P2 card with another one. Indication in display window A warning code blinks once every 2 seconds on the time code display section of the display window. 158 Maintenance and Inspections: Warning System