Panasonic AJHPX2700G AJHPX2700G User Guide - Page 167

Menu REC FUNCTION Items/ Adjustable Data Saved Range Remarks INTERVAL REC OFF MODE ON ONE SHOT Sets INTERVAL REC function. OFF: INTERVAL REC is not performed. ON: Uses internal memory to perform interval recording. ONE SHOT: Performs "one-shot" recording for the duration specified under REC TIME, and then stops. Note This item cannot be changed when "ON" is selected in LOOP REC MODE. -CUF - INTERVAL REC ON HOLD OFF Selects whether INTERVAL REC MODE settings are retained or not when the power is turned off once. ON: Retain OFF: Do not retain. The INTERVAL REC MODE is "OFF" whenever the power is turned on again. -CUF - REC TIME* 00s01f : 59s29f Set recording time for INTERVAL REC (1 cut). Note However the settings can be made frame by frame, and the numbers of the cut-off unit frames for the shortest time period and the set time on the actual operation may vary with the recording method. For details, refer to [Interval Recording] (page 41). -CUF - PAUSE TIME* 00h00m00s01f : 00h04m59s29f : 23h59m59s29f Specify pause time for INTERVAL REC. Note However the settings can be made frame by frame, and the numbers of the cut-off unit frames for the shortest time period and the set time on the actual operation may vary with the recording method. For details, refer to [Interval Recording] (page 41). -CUF - TAKE TOTAL TIME NONE : 5day Specify the time needed for INTERVAL REC. Select from "NONE" (continue until operation is manually stopped) to 5 days. -CUF - TOTAL REC TIME* NONE 00m00s01f : 99m59s29f OVER100min Display total recorded time for INTERVAL REC. The setting cannot be changed using this option. Displays the recording time (recording time needed for the P2 card) calculated using REC TIME, PAUSE TIME, and TAKE TOTAL TIME. Note A value based on actual processing is displayed. ----- AUDIO REC ON OFF Select whether or not sound will be recorded during INTERVAL REC. -CUF - START DELAY 0SEC : 10SEC Set the delay after pressing REC START/STOP to start recording in INTERVAL REC. -CUF - * This variable range is the numerical values for 59.94 Hz. For 50 Hz, the frame rate is up to 24f. The frame rate is up to 23f in 24PN (Native) mode. Items/ Adjustable Data Saved Range Remarks PRE REC MODE ON OFF Select whether or not to enable PRE RECORDING. ON: PRE RECORDING enabled. OFF: PRE RECORDING disabled. Note Specify the PRE RECORDING time by using the menu option PRE REC TIME. -CUF - PRE REC TIME 1SEC : 8SEC Set PRE RECORDING. 1-8SEC: Set the length of time that can be retrospectively recorded before the REC START/STOP button is pressed. -CUF - LOOP REC ON MODE OFF Select whether or not to enable LOOP REC. This setting can be used with PRE RECORDING features. ON: Enable LOOP REC. OFF: Disable LOOP REC. Notes After the power is turned off, this item will default to "OFF" the next time the power is turned on. This item cannot be changed when "ON" or "ONE SHOT" is selected in INTERVAL REC MODE. ---F- REC START ALL NORMAL Select operating modes that allow recording to start. ALL: Allow recording to start during stop, recording pause, and playback. NORMAL: Allow recording to start during stop and recording pause. Note Even if this is set to "ALL", the operation is "NORMAL", when "ON" or "ONE SHOT" is selected in INTERVAL REC MODE. -CUF - P.ON REC SLOT HOLD SEL SLOT1 -CUF - Select the recording order of the slot when the power is turned on. HOLD: The recording order starts with the card previously selected when the power was turned off. SLOT1: The recording order starts with the card that is inserted in slot 1 when the power is turned on. Note Displayed REC TIME, PAUSE TIME and TOTAL REC TIME are translated into either drop-frame or non-drop-frame according to the mode of operation. TAKE TOTAL TIME is actual time. Therefore, TOTAL REC TIME may incorporate fractions, depending on the settings. Example of drop-frame REC TIME 02s00f PAUSE TIME 02s00f TAKE TOTAL TIME 40min TOTAL REC TIME 19m59s06f Menu: Menu Description Tables 167