Panasonic AJHPX2700G AJHPX2700G User Guide - Page 166
OPTION MODE, Items, Data Saved, Adjustable, Range, Remarks, SCUFR, USB HOST, USB DEV., GREEN
View all Panasonic AJHPX2700G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Items/ Adjustable Data Saved Range Remarks USR SW F.RATE (720-59.94P, 720-60P) 1FRAME : 24FRAME : 60FRAME (720-50P) 1FRAME : 25FRAME : 50FRAME SCUFR When the FRATE function has been assigned to a user button, the starting frame rate under VFR operation is set. This setting is only displayed when 720P has been selected. When the mode has been changed using other settings and the frame rate value set here exceeds the maximum frame rate allowed by the set mode, the maximum frame rate is changed to the maximum frame rate of the set mode. SCAN REVERSE ON OFF This setting is for correcting an image which has been inverted by a film-use lens or anamorphic lens attached to the unit. SCUF R PC MODE SEL USB HOST USB DEV. This is for setting the operations mode of this unit when PC MODE is set to "ON" and an external device is connected to the USB connector. USB HOST: Allows data transfer from the unit to the USB-connected device. USB DEV.: Allows data transfer from the USB-connected device to the unit. Note When the PC MODE menu option is set to "ON", no change can be made to this option. ---F- PC MODE ON OFF Used to enable or disable the mode that allows the unit to be connected to a PC or an external hard disk drive via USB 2.0. ON: Sets the unit to the mode selected through the PC MODE SELECT menu option. OFF: Disables the PC MODE for normal operation. Note Once the power is turned off, the option is always set to "OFF" when the power is turned on next time. ---F- OPTION MODE Items/ Adjustable Data Saved Range Remarks REC TALLY RED GREEN CHAR Select the method for displaying the recording status of unit when controlling an external VTR by setting 1394 CONTROL items to "BOTH". Select the 1394 CONTROL item on the screen on the SYSTEM SETTING page. RED: The red tally lamp lights up. GREEN: The green tally lamp lights up. CHAR: The viewfinder displays "REC" in characters. -CUF - ACCESS LED OFF SLOT SIDE LCD SIDE BOTH Specify whether or not to enable the P2 card access LEDs. OFF: Disables both LEDs above the slots and on the side panel. SLOT SIDE: Enables the LED above the slots and disables the LED on the side panel. LCD SIDE: Enables the LED on the side panel and disables the LED above the slots. BOTH: Enables both LEDs above the slots and on the side panel. -CUF - P.OFF GPS DATA HOLD CLEAR Select whether or not to hold the UMID GPS position information while the power is turned off, thereby keeping this information as status data holding the previous value until the power is turned on again, which enables a new measurement to start. HOLD: Hold and save the data. CLEAR: Clear the data when the power is turned off, and save zero (NoInfo) from the next power-on until a new measurement is completed. -CUF - SDI METADATA ON OFF Used to specify whether or not to output metadata (UMID) to HD SDI. -CUF - SAVE SW (AUD ON OUT) OFF Select whether or not to forcibly disable the audio output when the SAVE ON/ OFF switch is set to [ON]. ON: Disable audio output. OFF: Enable audio output. - CUF - SAVE SW (LCD) ON OFF Select whether or not to automatically turn off the LCD monitor when the SAVE ON/OFF switch is set to [ON]. ON: Turn off LCD monitor. OFF: Do not turn off LCD monitor. -CUF - COMPRESSION NORMAL MODE DARK Select a compression mode for the 720P mode (Only for recording DVCPRO HD for 720-59.94P, 720-60P and 720-50P). NORMAL: The normal shooting mode is selected. DARK: Compressed video distortion that occurs in dark areas is lowered, which may increase distortion in other areas. -CUF - 166 Menu: Menu Description Tables