Panasonic AJHPX2700G AJHPX2700G User Guide - Page 140

SD memory card Status Display The status display enables a confirmation of the SD memory card formatted condition, available memory capacity etc. From the thumbnail menu, select PROPERTY  DEVICES  SD CARD. If the format is compatible with SD standards, the message "SD STANDARD: SUPPORTED" is displayed. If the format is not compatible with SD standards, the message "SD STANDARD: NOT SUPPORTED" is displayed. If this is the case, writing or reading will not be successful. Format the card with the unit. For more information on formatting SD memory cards, see [Formatting SD memory cards] (page 135). Note The indicated remaining memory capacity on the SD memory card (PROXY REM) can be an index of remaining memory capacity for the Proxy but may differ from the actual remaining capacity. For SD or SDHC cards with Class indications, the recording time may be reduced significantly compared with the actual capacity when images of short recording time are recorded repeatedly. If the remaining memory capacity exceeds 999 min, "999 min" is displayed. The remaining capacity is displayed only when set to record the Proxy record on the SD memory card. For the setting method, refer to the operation manual of the video encoder card (AJ-YAX800G, optional). Video Encoder Card Status Display (optional) Attaching the video encoder card (AJ-YAX800G, optional), select PROPERTY  DEVICES  PROXY from the thumbnail menu. The slot in which the video encoder card is inserted, and version information is displayed. 140 Manipulating Clips with Thumbnails: Properties