Panasonic AJHPX2700G AJHPX2700G User Guide - Page 34
White/Black Balance Adjustment to Recording Completion, Operation Buttons
View all Panasonic AJHPX2700G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
White/Black Balance Adjustment to Recording Completion For shooting, follow the steps below. 1 Select a filter according to light conditions. 2 When the white balance is saved: Position the WHITE BAL switch to [A] or [B]. White/Black balance adjustment to recording completion When the white or black balance is not saved and you have no time to adjust the white balance: Position the WHITE BAL switch to [PRST]. This adjusts the white balance against the filter according to the position of the FILTER control. If the white balance is adjusted on the spot: Position the WHITE BAL switch to [A] or [B] and shoot a white test subject so that it appears at the center of the 3 screen. Then, follow the steps below to adjust the white balance. 1 Press the AUTO W/B BAL switch toward [AWB] to adjust the white balance. 2 Press the AUTO W/B BAL switch toward [ABB] to adjust the black balance. 3 Press the AUTO W/B BAL switch toward [AWB] to adjust the white balance again. 1 4 5, 6 2 2 For directions on making adjustments, see [Adjusting the White Balance] (page 49) and [Adjusting the Black Balance] (page 52). 3 Point the camera at your subject to adjust the focus, and zoom. 4 To use the electronic shutter, set the shutter speed and operation mode. For more information, see [Setting the Electronic Shutter] (page 53). 5 Press either the REC START/STOP button or VTR button at the lens to start recording. During recording, the REC lamp in the viewfinder stays illuminated. 6 To stop recording, press either the REC START/STOP button or VTR button at the lens. The REC lamp in the viewfinder goes out. Operation Buttons During recording, all operation buttons (REW, FF, PLAY/ PAUSE, STOP) are disabled. 34 Recording and Playback: Basic Procedures