Panasonic AJHPX2700G AJHPX2700G User Guide - Page 88

Settings of signals output from MON OUT connector The MON OUT connector outputs HD SDI signals or downconverted analog signals. Set the video signals output from the MON OUT connector by using the MONITOR OUT item on the menu ( screen on the SYSTEM SETTING page). Item MONITOR OUT Variable range VBS HD SDI Remarks Set video signals output from the MON OUT connector. VBS: Analog composite signals are output. HD SDI: HD SDI signals are output. The signals output from the MON OUT connector are switched with the OUTPUT SEL switch. However, the switching operation is not acknowledged during the recording operation. MEM: CAM: OFF: During EE, such as recording, video images taken by the camera are output. Meanwhile, signals on the P2 card are output during playback. The camera images are output at all times. No signal is output from the MON OUT connector. HD SDI AɾB TCG MEM F-RUN CAM SET OFF b R-RUN MON OUT CHARACTER OUTPUT SEL ON MEM CAM OFF OFF b. MON OUT OUTPUT SEL switch Set the characters to be superimposed on the signals output from the MON OUT connector in the OUTPUT ITEM item on the menu ( screen on the SYSTEM SETTING page). c HD SDI AɾB TCG MEM F-RUN CAM SET OFF R-RUN MON OUT CHARACTER OUTPUT SEL ON MEM CAM OFF OFF c. MON OUT CHARACTER switch Note When VBS has been selected as the MON OUT signal and the menu option SYSTEM MODE has been set to "108024PsF" and "720-60P", the MON OUT signal is luminance signal video. The menu option SYSTEM MODE can be found in the screen on the SYSTEM SETTING page. 88 Adjustments and Settings for Recording: Selection of video output signals