Panasonic AJHPX2700G AJHPX2700G User Guide - Page 54
Setting the Shutter Mode and Speed, SHUTTER switch, Normal mode, SYNCHRO SCAN
View all Panasonic AJHPX2700G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Setting the Shutter Mode and Speed The shutter speed in any shutter mode is set using the SHUTTER switch. In SYNCHRO SCAN/SYNCHRO SCAN2 mode, shutter speed can be switched easily, using the SYNCHRO SCAN adjustment buttons (+/-) on the side panel. Note that the range of selectable shutter speeds may be predefined; whether or not to use the SYNCHRO SCAN mode may be determined through the and screens. These screens are found in the CAM OPERATION page. The selected shutter speed is retained even if the unit is turned off. 2 Once more, press the SHUTTER switch towards [SEL]. Repeat this switchover until the desired mode or speed appears in the viewfinder screen. If all modes and speeds are available, the display changes in the following order: Normal mode POSITION1 POSITION2 POSITION3 SYNCHRO SCAN2 mode POSITION4 POSITION5 POSITION6 SYNCHRO SCAN mode Viewfinder displays relating to the shutter See [Viewfinder Screen Status Displays] (page 74). Note When recording using VFR, set the shutter speed to 1/60 or 1/100 to allow the recording to continue without any change in brightness when the frame rate is changed mid-way through recording. 1 Press the SHUTTER switch, positioned at [ON], towards [SEL]. a a. SHUTTER switch 54 Adjustments and Settings for Recording: Setting the Electronic Shutter