Panasonic AJHPX2700G AJHPX2700G User Guide - Page 87

Adjustments and Settings for Recording Selection of video output signals The unit employs the HD SDI A · B connector and the MON OUT connector as connectors for outputting video signals. Settings of signals output from HD SDI A · B connector Change the characters of the signal output from the HD SDI A · B connector using the screen from the menu. The character content output from the HD SDI A · B connector and MON OUT is the same. The signals output from the HD SDI A · B connector are switched with the HD SDI A · B switch. However, the switching operation is not acknowledged during the recording operation. MEM: CAM: OFF: During EE, such as recording, video images taken by the camera are output. Meanwhile, signals on the P2 card are output during playback. The camera images are output at all times. No signal is output from the HD SDI A · B connector. a HD SDI AɾB MEM CAM OFF TCG F-RUN SET R-RUN MON OUT CHARACTER OUTPUT SEL ON MEM CAM OFF OFF a. HD SDI A · B switch Item OUTPUT ITEM HD SDI A · B CHAR Variable range MENU ONLY TC STATUS OFF ON Remarks Set the characters to be superimposed on the output signals from the HD SDI A · B connector and MON OUT connector. MENU ONLY: The menu screen is superimposed only when the menu is accessed. This normally displays nothing. TC: Time codes are superimposed. (When the menu is accessed, the menu screen is superimposed.) STATUS: The characters that are the same as the characters superimposed in the viewfinder screen are superimposed. (When the menu is accessed, the menu screen is superimposed.) ON: OFF: The characters are superimposed on the HD SDI A · B connector. The characters are not superimposed on the HD SDI A · B connector. 87 Adjustments and Settings for Recording: Selection of video output signals