Panasonic AJHPX2700G AJHPX2700G User Guide - Page 188

WHITE BALANCE MODE Items/ Adjustable Data Saved Range Remarks FILTER INH ON OFF For selecting independently whether memory data for white balance (Ach, Bch) is retained or not for the respective CC filters. ON: Regardless of the CC filter, data for the memories (2 memories) for Ach and Bch is retained. OFF: The memory data (8 memories) for Ach and Bch is retained for the respective CC filters. - CU F R SHOCKLESS AWB OFF FAST NORMAL SLOW1 SLOW2 SLOW3 For setting the length of time for transiting to the switched position of white balance, when the position of the WHITE BAL switch is changed. OFF: To transit instantly FAST: About 1 second NORMAL: About 2 seconds SLOW1: About 3 seconds SLOW2: About 10 seconds SLOW3: About 20 seconds - CU F R AWB AREA 25% 50% 90% For switching the detection area for executing the automatic adjustment of white balance. 25%: An area near the screen center equivalent to 25% of the screen is detected. 50%: An area near the screen center equivalent to 50% of the screen is detected. 90%: An area equivalent to 90% of the screen is detected. - CU F R TEMP PRE SEL VAR SW 3.2K/5.6K For changing the detection area on which automatic white balance adjustment is performed. VAR: From 2300K to 9900K is selectable. 3.2K/5.6K: The detection area is fixed to 3200K or 5600K. ---F- COLOR TEMP PRE 2300K : 3200K : 9900K For setting the color temperature when the WHITE BAL switch is set to the [PRST] position. Since the range of color temperatures that can be set will vary with the CC filter position, a numerical value cannot be changed even if the color temperature is changed when a high color temperature is set. ---F- AWB A TEMP 2300K : 3200K : 9900K ---F- For setting the color temperature when the WHITE BAL switch is set to the [A] position. If the automatic adjustment of white balance is executed in the [A] position, the color temperature at that time is memorized in the position of the WHITE BAL switch [A]. Items/ Adjustable Data Saved Range Remarks AWB B TEMP 2300K : 3200K : 9900K For setting the color temperature when the WHITE BAL switch is set to the [B] position. If the automatic adjustment of white balance is executed in the [B] position, the color temperature at that time is memorized in the position of the WHITE BAL switch [B]. ---F- LENS/IRIS Items/ Adjustable Data Saved Range Remarks A.IRIS LEVEL 000 : 045 : 100 - CU F R Set the target value for auto iris. A.IRIS PEAK/ 000 AVE : 030 : 100 Determine the peak-to-standard ratio for the auto iris. A larger value sets the auto iris to respond to the peak in the iris detection window, while a smaller value sets it to respond to the average value in the window. - CU F R A.IRIS WINDOW NORM1 NORM2 CENTR Select the auto iris detection window. NORM1: The window closer to the center of the screen. NORM2: The window closer to bottom of the screen. CENTR: The spot window in the center of the screen. - CU F R IRIS GAIN CAM LENS Select which unit controls IRIS GAIN. Note Lenses with an extender, such as 2, 0.8 sold before FUJINON DIGI POWER, perform iris compensation while enabling the extender. Therefore, if this setting is switched to "CAM", the camera's iris control will not operate properly. - CU F R IRIS GAIN 01 VALUE : 10 : 20 - CU F R Set the adjustable value for IRIS GAIN. This setting is effective when "CAM" is selected for IRIS GAIN. 188 Menu: Menu Description Tables