Panasonic AJHPX2700G AJHPX2700G User Guide - Page 65

Adjustments and Settings for Recording Setting the Internal Clock's Date and Time 1 Position the DISPLAY switch at [UB]. 2 Press the HOLD button to display DATE in the display window. 3 Position the TCG switch at [SET]. 4 Use the cursor and SET buttons to set the year, month and day (Y/M/D). Note that any later than 2030 cannot be set. Z button: Shifts the target (blinking) digit to the right. Y button: Shifts the target (blinking) digit to the left. U button: Advances the blinking number by one digit. V button: Winds back the blinking number by one digit. 5 Press the HOLD button to display TIME in the display window. 6 Use the cursor buttons to set the hour, minute and second (h/min/s). 7 Position the TCG switch at [F-RUN] or [R-RUN]. The internal clock starts at the moment the switch position is changed. 8 Press the HOLD button to display a time zone (time difference between local time and Greenwich Mean Time) in the display window. 9 Position the TCG switch at [SET]. 10 Use the U and V buttons to set the desired hours and minutes ahead of (no sign) or behind (- sign) the Greenwich Mean Time. Example: If the local time is 5 hours behind Greenwich Mean Time, set the time zone to "5:00 -". The time zone is always recorded, together with the date and time, as metadata. See the table at right to set the time zone according to your local time. 11 Position the TCG switch at [F-RUN] or [R-RUN] to accept the time zone. Notes When using the unit for the first time, be sure to perform this setting beforehand. Do not change the setting during use of the unit. When the TCG switch is positioned at [SET], thumbnails cannot be manipulated. Time difference Area 00:00 Greenwich +00:30 +01:00 Central Europe +01:30 +02:00 Eastern Europe +02:30 +03:00 Moscow +03:30 Tehran +04:00 Abu Dhabi +04:30 Kabul +05:00 Islamabad +05:30 Bombay +06:00 Dacca +06:30 Yangon +07:00 Bangkok +07:30 +08:00 Beijing +08:30 +09:00 Tokyo +09:30 Darwin +10:00 Guam +10:30 Lord Howe Island +11:00 Solomon Islands +11:30 Norfolk Island +12:00 New Zealand +12:45 Chatham Islands +13:00 Time difference Area -12:00 Kwajalein -11:30 -11:00 Midway Island -10:30 -10:00 Hawaii -09:30 Marquesas Islands -09:00 Alaska -08:30 -08:00 Los Angeles -07:30 -07:00 Denver -06:30 -06:00 Chicago -05:30 -05:00 New York -04:30 -04:00 Halifax -03:30 Newfoundland Island -03:00 Buenos Aires -02:30 -02:00 Mid-Atlantic -01:30 -01:00 Azores Islands -00:30 Notes In step 4, if the TCG switch is positioned at [F-RUN] or [RRUN], this also activate the internal clock. To cancel date, time and time zone settings in process, hold down the SET button and position the TCG switch at [F-RUN] or [R-RUN]. Clock accuracy fluctuates between about ±30 seconds per month when the power is turned off. If more accurate timekeeping is required, check the time when the power is turned on and, if necessary, reset the clock. When the GPS unit AJ-GPS910G is installed, and if it successfully receives time information, the internal clock keeps accurate (local) time based on the received time (Greenwich Mean Time) and the time zone. If the date and time differ from the actual local time, the time zone may not be set correctly. Check again, to see if the time zone is set correctly. (The date and time need not be set again.) The built-in clock operates for several years on a lithium battery built into the unit. When the lithium battery is exhausted, the viewfinder indicates the message "BACKUP BATT EMPTY" when the power is turned on. For more information, see [Maintenance] (page 150). 65 Adjustments and Settings for Recording: Setting Time Data